Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder

Many people are unsure which MIG welder to go for when choosing a low cost hobby welder for their home or for auto body work but the Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder is the perfect welder to start with.

While the choice of welders on the market is currently phenomenal making it hard to choose which welder is best for you, the Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder fits the bill every time.

This welder will allow you to weld high gauge steel, cast iron and stainless steel, whilst also offering great protection and the ability to deliver quality welds even for beginners.

Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder


Welders Features:

* 90 amps output.
* Can weld anything up to 3/16 inch steel (4.8 mm).
* Can weld MIG and flux-core.
* Four different power settings
* Fan cooled to ensure unit doesn’t overheat
* Runs at 115V, 20 amp outlet so can be used through a household plug.
* Thermal overload protection built in and automatic
* Tweco type torch that has safety control on and off capabilities
* Comes complete with one year warranty on parts and a ten year limited warranty on the transformer

Welders Specifications:

Input Power - 115/20/60
Rated Output - Volts: 110, Amps: 130, Duty Cycle: 20%

While many will say that the Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder is good for light industrial work we will admit this is not the case. This is a great hobby and auto body welder and nothing more. If you are looking for a no thrills low cost and low maintenance welder that will deliver a quality weld then this is the welder for you.

If you are looking for a high performance welder for industrial use whether it is light industrial or heavier then the Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder is not the welder you require.

Click here to find the Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder on Amazon!

Read More

Millermatic 140 907335 Mig Welder 110V Autoset New

It can be quite a difficult choice when looking at welders to support light industrial use, there are many on the market and the price ranges vary widely but the truth is that you want something that carries out welding well and is robust to last for long periods of time.

There are a great many welders on the market from an array of welding brands but one brand that many can say stands for quality is Miller and the Millermatic 140 907335 Mig Welder 110V Autoset New welder is a hugely popular welder in their product line.

Millermatic 140 907335 Mig Welder 110V Autoset New

Welders Features:
• 90 amps output.
• Can weld anything up to 3/16 inch steel (4.8 mm).
• Can weld MIG (doesn’t come with shielding) and flux-cored.
• Runs at 115V, 20 amp outlet so can be used through a household plug.
• Has a cold contactor safety feature so the welding wire is kept cold until welding occurs.
• Can be used for anything from auto repair to light industrial.
• Special short circuit protection through tip saver technology
• Auto Set means your welder automatically sets to the required parameters
• Comes complete with one year warranty

Welders Specifications:
Input Power - 115/20/60
Rated Output - 90A/18V/20%
Input Current - 20A
Output Range – 90A
Net Weight 80.0 lbs. (27.3 kg.)

The Millermatic 140 907335 Mig Welder 110V Autoset New is a brilliant light industrial Mig welder that can be used for mig welding and flux core welding. If you want a powerful welder that can be plugged into a standard plug socket then this is the welder for you. Many find the Millermatic 140 907335 Mig Welder 110V Autoset New a brilliant welder for hobby, auto repair and light industrial use.

It must also be mentioned that being of the blue Miller products you will enjoy having a robust and quality product that all Miller products are built to so that they can be part of the Miller product family.

Click here to find the Millermatic 140 907335 Mig Welder 110V Autoset New on Amazon!

Read More

About Us

The Welding was created with any welder in mind and over time you will find a wealth of information from welding projects and training articles to information on all manner of welding products.

The owner of The Welding is a former welder who understands the needs and requirements of a welder and the equipment they use, from this you will find the information pivotal in making your welding a success whether it is purchasing welding equipment or find out new and useful information.

Read More

Welding Shirts are Important Welding Clothing

Many welders remember their gloves, they remember their goggles or mask, but how many welders out there can say they truly wear safety clothing. When welding the first priority is safety and the right clothing is of paramount importance where safety is involved.

You would not want to carry out welding with sparks flying and find your wearing highly flammable clothing or clothing that does not protect you, so why don’t you wear welding clothing such as welding shirts?

Welding shirts, which are also known as welding jackets, is an important part of safety clothing for welding as it protects the welder from burning themselves or worse.

Welding shirts are not the most fashionable of clothing and this might be why many do not wear them, but fashion is not the function they were created for. Where it’s an arc flash or a rogue spark, the heat generated from welding can be dangerous and that is what welding shirts were created to protect you from.

In the days of old many tried to steer away from wearing welding shirts as they were massive woolen affairs that were itchy and cumbersome, today however the design has changed. Welding shirts in the present may not be fashion conscious but they are comfortable and light weight so they are easy to wear and offer dexterity for welding purposes.

One of the lures of welding shirts is that compared to welding aprons and leather welding clothing variants they are lightweight and while not overtly fashionable can still be worn outside of the welding environment without gaining too much attention.

Welding shirts are created by cotton twill fabric with some leather combinations in some versions. The seams of the shirts are sewn using Kevlar which many of you will know is used in body armor; this is for strength and to stop heat getting through the weak area of the seams.

For any welders out there looking for welding protective clothing why not look at welding shirts, they protect you while giving you the ability to move with ease while welding.

Read More

Welding Torch

It doesn’t matter what type of welding you are carry out, it cannot be completed without the use of a welding torch. While the welder does all the feeding, provides electricity and more, the torch is the tool the welder uses in hand to carry out the work.

Those in the welding world know that for all the different types of welding and welding functions, there are different types of torches for the job too. An example is that a Mig welder will carry a different torch to a stick welder and both will be different to an Oxyacetylene welding torch.

As well as welding torches being different, the process for using them varies too, again this depends greatly on the welding process being used.

While the exterior of a welding torch makes it look simple to use, the truth is that it is a brilliantly designed piece of equipment when you open it up and look inside (something we don’t expect you to do).

Standard design

While the aesthetics of a welding torch make them look only slightly different, the over working design makes them all very different indeed.  This being said, all welding torches have a design basics where they all carry the same parts.

For example all types of welding torch have hoses coming through the welding torch; they all have a handle and either a trigger or valve and are all finished off with a welding head.

How does a torch work?

All welders have pipes running inside where the shielding gas runs through the torch to the welding nozzle at the top of the welding head. For manual welders the welder with manually feed in the filler wire but for semi-automatic welders such as Mig welders the welding torch will have a trigger that also feeds the wire to the nozzle.

The welder will guide the welding torch along the work they are welding and produce a weld by using the welding torches functions correctly.

Read More

Welding Salary Range

We all know that in any industry or job type there is a pay scale based on job requirements, a person’s ability and their level of experience. In the world of welding this is no different, in fact it may even be broader than most job types because of the large variances in welding jobs and the different industries welding covers.

The average welding job in the United States gives a salary return of between fifty nine thousand dollars and eighty five thousand dollars. Not a bad salary one must say, but as a person increases their ability and experience the salary range increases, it also increases further if the welder moves intricate or dangerous welding fields. An example of this is that a welder in a fabrication shop will not command the salary of an underwater diver welder for instance.

If you look at the welding salary range it is very clear to see that the oil and gas industry hogs the top end of salaries in the welding salary range. The bottom end of the scale is propped up by those in the production and fabrication industry.

Below is the welding salary ranges by industry:

Fabrication and Product Manufacturing - $61,000 - $75,000
Automotive - $63,000 - $78,000
Oil & Gas - $68,000 - $85,000
Manufacturing and Distribution - $63,000 - $78,000

There is one position that did not get used for these welding salary ranges; this is the job of an underwater diver welder. This is a very specialist job, one that requires a very special person to carry out the work. For those that have welding experience and a commercial diving license the salary that they can command is astronomical and if working full time on projects will easily be over six figures. The highest paid industry for diver welders is the fossil fuels industry of oil and gas.

Should you be looking to get into the welding field as a career then the best option is to pass your welding certification and start looking at lower paid welding jobs to build your knowledge and experience. After this you can then start looking at higher paid welding jobs that will challenge your welding skills and mental strength!

Read More

Rig Welder Jobs

Many have heard of Rig welder jobs but do not truly understand what a rid welder job is thus do not know whether to pursue this avenue in their welding career. Why not read on and find out about Rig welder jobs and whether they fit into your welding career aspirations.

What do you do as a Rig welder?

Rig welders carry out a dual function role based in the oil industry.

One function is to work out at sea on the oil companies rigs carrying out maintenance and repair on all manner of oil rig equipment and the oil rig itself.

The other function involves being based on land in a rig welding team that travels around working on one project after another. These projects vary from small to large and are completed in support of many Rig welders found on various sites.

The rig welder is the basic entry level welding job in the oil industry and is the perfect starting position for anyone wishing to build a long and successful, not to mention well paid welding job in the oil industry.

Where can you get Rig welder jobs?

Firstly you need to be aware that rig welder jobs are among the most wanted jobs in the welding industry. This is because a welder will learn more about their skills whilst also gaining a very lucrative salary too.

Because of the association with the oil industry and the high skill levels required for rig welder jobs the job commands a salary around double the amount of most other welding jobs. This is also in part due to the dangers of living and working on oil rigs at sea.

Finding and applying for rig welder jobs is actually quite easy, simply contact oil industry specialist employment agencies or look through websites catering to niche jobs. It must be said that while applying is easy, getting the job is actually a lot harder as there will be many people vying for the position.

Read More